Description
This module provides all that is required to allow microcontrollers to connect to the ethernet bus using the ENC28J60. All lines that are required to communicate with ENC28J60 are brought out to two 6 way , 0.1" headers suitable for use in standard prototype board.
In addition to the basic module, the TM version has the addition of a 16 MBit, Flash EEPROM(SST25VF016B) and a SPI temperature sensor(TC77-3.3).
The ENC2860 IC is a complete Media Access Controller for Ethernet. It is unique in that only requires 4 wires (SPI Interface) for communication with a host controller.
Target applications include VoIP, Industrial Automation, Building Automation, Home Control, Security and Instrumentation.
Before shipping the module is fully tested to ensure it is fully operational.
General
- IEEE 802.3 compatible Ethernet Controller
- Integrated MAC and 10BASE-T PHY
- 8 Kbyte Transmit/Receive Packet Dual Port Buffer SRAM
- Programmable Automatic Retransmit on Collision
- Programmable Padding and CRC Generation
- Programmable Automatic Rejection of Erroneous Packets
Buffer
- Configurable transmit/receive buffer size
- Hardware managed circular receive FIFO
- Byte-wide random and sequential access
- Internal DMA for fast memory copying
- Hardware assisted IP checksum calculation
PHY
- Wave shaping output filter
- Loopback mode
MAC
- Support for Unicast, Multicast and Broadcast packets
- Programmable pattern matching of up to 64 bytes within packet at user defined offset
- Programmable wake-up on multiple packet formats, including Magic Packet®, Unicast, Multicast, Broadcast, specific packet match or any packet.
